Machine Tools

‘Milwaukee’ K&T, vert. Milling, Mod. CSM, 13½ x 64”
$4,211.00 USD Request more Information
10 x 24in.”Freeport” Surface Grinder, Mod. SGS-1024, w/ Incremental Downfeed *
$8,800.00 USD Request more Information
10″ x 22″ ‘Boxford’ lathe, taper turning, chucks, more. Mod. AUD (England)
$2,950.00 USD Request more Information
1½ in. Alzmetal ABOMAT AB40 drill press 24″ x 18″ table, Germany, SUPER DEAL!
$1,999.00 USD Request more Information
1¼” Cap. Drill Press, Geared, Pedestal, “STRANDS” 3MT. Mod. CS30 / 2L
$900.00 USD Request more Information
16 .x 54 in. Monarch Lathe, SoC 18½”, DRO-2axis, chucks, taper, 2 steady rests
$4,750.00 USD Request more Information
16 in.wide Vise, Heavy-duty, Shaper or Milling, 360°rotate. Great Condition!
$675.00 USD Request more Information
16″ Blanchard No. 11 rotary surface grinder, good chuck and rectifier
$4,900.00 USD Request more Information
18 x 75″ vertical Milling, Bed-type.massive,”Kafo”. ex Nortel toolroom!
$12,900.00 USD Request more Information
18″ x 64″ btc. VDF Engine Lathe, w/ DRO, All feeds, speeds, V.Good, 2.5″ bore
$6,644.00 USD Request more Information
20-x-60-in-Lathe-power-feeds-chuck-etc-Swiss-Made-by-Oerlikon-heavy-duty
$3,450.00 USD Request more Information
24inch rotary table, from Cincinnatti rotary milling machnes, X & Y, precision.
$950.00 USD Request more Information
32″ swing x 120″ btc.’Sofia’ Lathe, equipped, 4-1/8in. spdl. in & m/m,(Euro)
$11,500.00 USD Request more Information
5′ Radial Drill, Kitchen & Wade (V.G. England)
$6,500.00 USD Request more Information
6 in. Oster Pipe and Bolt Threader, Model 716
$7,999.99 USD Request more Information
6 x 18 ” Surface Grinder, VG. condition! ” Excello”, USA. XLO.DEAL!
$2,995.00 USD Request more Information
AGIE-Metric100-CNC-WIRE-EDM-Fast-Track
$6,500.00 USD Request more Information
Archdale drill 48 to 2400 RPM 18″x12″ table
$1,899.99 USD Request more Information
Archdale-Multi-Spindle-radial-drill-18-x12-table
$1,499.99 USD Request more Information
Bridgeport Milling Machine, 2 HP, Series 1, with 2 axis DRO
$4,567.00 USD Request more Information
Chipper,Waferizer, 200HP, for wood & logs, ex Domtar, makes 2″ chip,REDUCED !
$8,500.00 USD Request more Information
Cincinnati no. 3 vertical milling, Table 62½ x 15½ ” power feeds, etc.
$4,500.00 USD Request more Information
Cylindrical Grinder, ID/OD 10 x 24″, “Churchill” Complete with internal spindle
$4,999.00 USD Request more Information
DoAll-G10-Surface-Grinder-26-Travel-Electro-Magnetic-Chuck-Coolant-Tank-Pump
$3,899.00 USD Request more Information
Emco Compact 10 Lathe
$5,750.00 USD Request more Information
Engine Lathe, 26 x 120 in.,Digital ROs, 4″ bore. Hardened, Excellent, installed!
$10,500.00 USD Request more Information
Excello-Vertical-Milling Machine, Mod. 602
$2,949.99 USD Request more Information
GRINDING WHEELS, New! – 4″ solid, foundry, welding etc.; steel Core, 1/2 PRICE
$7.50 USD Request more Information
HARDINGE MODEL HC CF PRECISION CHUCKER LATHE, 13″, BC 5″ Chuck, Collets
$4,499.00 USD Request more Information
Hardinge Second Operation Lathe, Model DV-59 – SUPERB CONDITION, WELL EQUIPPED!
$3,499.00 USD Request more Information
Havlik Hydraulic Milling Head 20HP MT50
$8,500.00 USD Request more Information
HME 55 Ton Air clutch and variable stroke, great condition!
$11,500.00 USD Request more Information
Horizontal, universal Milling w/ TOS 360° vertical head, 11 x 43″ table
$4,999.99 USD Request more Information
Huron MU6 Hi-Precision European Vert Milling. Universal swivel head. SOLD !
$25,000.00 USD Request more Information
INDUMA VERTICAL MILL 9″ X 42″ TABLE COMPLETE WITH 2 AXIS DRO
$2,199.00 USD Request more Information
Jakobsen Surface grinder Made in Denmark 8×24 Magnetic Chuck
$3,900.00 USD Request more Information
Kaltenbach KKS 850 cold-cut metal cut-off saw, w/ blade
$3,900.00 USD Request more Information
Kent Owens 2-20 Horizontal mill Superb condition!
$4,444.44 USD Request more Information
King 30″ VERTICAL BORING MILL, VTL)
$4,500.00 USD Request more Information
Lapidary saw, stone, glass, ceramic, 12″ blade, 24″x14″ table
$1,450.00 USD Request more Information
Lathe TOS Mod. SN63B 24″ x 160″ between ctrs, 3″ spindle bore
$14,500.00 USD Request more Information
Lathe, ‘Drummond’ 26″ x 10ft. 4¼” Spdl. bore, taper-turn, V.Good!
$9,500.00 USD Request more Information
Lathe, “‘IKEGAI” 19″ (22″g) x 60″ BC 2-1/4″ spl bore, crosslide readout, Japan
$6,450.00 USD Request more Information
Lathe, Heavy Duty, 21′ x 64″, 30 HP, 3 jaw, 16″ steady rest, WMW Niles Offers
$3,500.00 USD Request more Information
Lathe, Lodge & Shipley 26″ swing 80″ Between ctrs, Well built, USA, Great deal!
$9,499.00 USD Request more Information
Milling-hor-production-56-table-50-spdl-Climb-Milling-Jerwag-Germany
$3,900.00 USD Request more Information
Milling-machine-13×52-hor-universal-NEW-XYZ-power-rapids-tooling
$8,900.00 USD Request more Information
Milling-machine-vert-10×50-First-Bridgeport-type-40-spdl-3-ax-Feeds-DRO
$6,999.00 USD Request more Information
Milling, vertical, K&T ‘Milwaukee’ Mod.H, 10×50 table. Power X,Y & Z $$ REDUCED!
$3,900.00 USD Request more Information
Motch & Merryweather 16″ Cold Saw
$2,499.00 USD Request more Information

‘Milwaukee’ K&T, vert. Milling, Mod. CSM, 13½ x 64”

10 x 24in.”Freeport” Surface Grinder, Mod. SGS-1024, w/ Incremental Downfeed *

10″ x 22″ ‘Boxford’ lathe, taper turning, chucks, more. Mod. AUD (England)

1½ in. Alzmetal ABOMAT AB40 drill press 24″ x 18″ table, Germany, SUPER DEAL!

1¼” Cap. Drill Press, Geared, Pedestal, “STRANDS” 3MT. Mod. CS30 / 2L

16 .x 54 in. Monarch Lathe, SoC 18½”, DRO-2axis, chucks, taper, 2 steady rests

16 in.wide Vise, Heavy-duty, Shaper or Milling, 360°rotate. Great Condition!

16″ Blanchard No. 11 rotary surface grinder, good chuck and rectifier

18 x 75″ vertical Milling, Bed-type.massive,”Kafo”. ex Nortel toolroom!

18″ x 64″ btc. VDF Engine Lathe, w/ DRO, All feeds, speeds, V.Good, 2.5″ bore

20-x-60-in-Lathe-power-feeds-chuck-etc-Swiss-Made-by-Oerlikon-heavy-duty

24inch rotary table, from Cincinnatti rotary milling machnes, X & Y, precision.

32″ swing x 120″ btc.’Sofia’ Lathe, equipped, 4-1/8in. spdl. in & m/m,(Euro)

5′ Radial Drill, Kitchen & Wade (V.G. England)

6 in. Oster Pipe and Bolt Threader, Model 716

6 x 18 ” Surface Grinder, VG. condition! ” Excello”, USA. XLO.DEAL!

AGIE-Metric100-CNC-WIRE-EDM-Fast-Track

Archdale drill 48 to 2400 RPM 18″x12″ table

Archdale-Multi-Spindle-radial-drill-18-x12-table

Bridgeport Milling Machine, 2 HP, Series 1, with 2 axis DRO

Chipper,Waferizer, 200HP, for wood & logs, ex Domtar, makes 2″ chip,REDUCED !

Cincinnati no. 3 vertical milling, Table 62½ x 15½ ” power feeds, etc.

Cylindrical Grinder, ID/OD 10 x 24″, “Churchill” Complete with internal spindle

DoAll-G10-Surface-Grinder-26-Travel-Electro-Magnetic-Chuck-Coolant-Tank-Pump

Emco Compact 10 Lathe

Engine Lathe, 26 x 120 in.,Digital ROs, 4″ bore. Hardened, Excellent, installed!

Excello-Vertical-Milling Machine, Mod. 602

GRINDING WHEELS, New! – 4″ solid, foundry, welding etc.; steel Core, 1/2 PRICE

HARDINGE MODEL HC CF PRECISION CHUCKER LATHE, 13″, BC 5″ Chuck, Collets

Hardinge Second Operation Lathe, Model DV-59 – SUPERB CONDITION, WELL EQUIPPED!

Havlik Hydraulic Milling Head 20HP MT50

HME 55 Ton Air clutch and variable stroke, great condition!

Horizontal, universal Milling w/ TOS 360° vertical head, 11 x 43″ table

Huron MU6 Hi-Precision European Vert Milling. Universal swivel head. SOLD !

INDUMA VERTICAL MILL 9″ X 42″ TABLE COMPLETE WITH 2 AXIS DRO

Jakobsen Surface grinder Made in Denmark 8×24 Magnetic Chuck

Kaltenbach KKS 850 cold-cut metal cut-off saw, w/ blade

Kent Owens 2-20 Horizontal mill Superb condition!

King 30″ VERTICAL BORING MILL, VTL)

Lapidary saw, stone, glass, ceramic, 12″ blade, 24″x14″ table

Lathe TOS Mod. SN63B 24″ x 160″ between ctrs, 3″ spindle bore

Lathe, ‘Drummond’ 26″ x 10ft. 4¼” Spdl. bore, taper-turn, V.Good!

Lathe, “‘IKEGAI” 19″ (22″g) x 60″ BC 2-1/4″ spl bore, crosslide readout, Japan

Lathe, Heavy Duty, 21′ x 64″, 30 HP, 3 jaw, 16″ steady rest, WMW Niles Offers

Lathe, Lodge & Shipley 26″ swing 80″ Between ctrs, Well built, USA, Great deal!

Milling-hor-production-56-table-50-spdl-Climb-Milling-Jerwag-Germany

Milling-machine-13×52-hor-universal-NEW-XYZ-power-rapids-tooling

Milling-machine-vert-10×50-First-Bridgeport-type-40-spdl-3-ax-Feeds-DRO

Milling, vertical, K&T ‘Milwaukee’ Mod.H, 10×50 table. Power X,Y & Z $$ REDUCED!

Motch & Merryweather 16″ Cold Saw